In the majority of cases, most people spend quite a bit of money purchasing their lift truck. Hence, it is really important to take good care of it in order to protect your investment well into the long run. It is really a great idea to know the procedures which are undertaken in maintaining and taking care of this machine.
By starting up the forklift and listening closely how it works is among the best ways to tell how good the engine is running. Like for example, if there are any misses or knocks, the equipment is faulty and this must raise several concerns. In addition listen carefully for any squealing sounds that come from the belts since these noises will provide you with a wealth of information.
Some of the main parts needing attention during maintenance comprise the safety warning devices, gauges, horn, the overhead guard and the lights. Any faulty parts or burnt out light bulbs need to be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
The battery compartment terminals should be cleaned when the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them well. Each battery cell should be inspected in order to make sure that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters should be regularly replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make certain to apply some grease. Check the engine belts for any cracks or frays. If you find any, fix the issue accordingly. Then, inspect each and every other part of the machinery like the wheels. If any kind of issue or fault is detected, be certain to deal with it immediately in order to make sure the machinery is running at its safest and optimum levels.